• <source id="qkwcs"></source>
    <wbr id="qkwcs"></wbr>




    熱門產品: 高低溫試驗箱 步入式高低溫濕熱試驗室 高低溫交變試驗箱 高低溫沖擊試驗箱 高低溫濕熱試驗箱


    • 行業動態
    • 技術文章
    • 點擊這里給我發消息 點擊這里給我發消息 咨詢熱線:136-0232-8526
      客服郵箱:asLi898@163.com saLes@asLi163.com
      聯系電話:艾先生 136-0232-8526

    高低溫試驗箱ASTM G24-13標準

    來源:本站 發布時間:2018-11-06 19:02:00 閱讀:1100

    本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用,為確保測試結果的準確性、節省您的時間,如需ASTM G24-13標準詳細信息或ASTM G24-13具體測試方法,歡迎與我們技術人員聯系或給我們留言,我們將為您相關的技術支持。


    ASTM G24-13標準介紹

    ASTM G24是在透過玻璃的日光下進行曝露試驗的標準測試方法: 本標準用于評價非金屬材料耐玻璃過濾的太陽輻射的能力。標準限于開展暴露的方法。試驗樣品的制備和結果的評定在特定材料的各種標準中規定?,F行標準修訂于2013年。


    1. Scope

    1.1 This practice evaluates the resistance of nonmetallic materials to solar radiation filtered through glass in passively ventilated and non-vented enclosures. For exposures in under glass enclosures with forced air circulation, refer to Practice G201.

    1.2 For direct exposures, refer to Practice G7.

    1.3 This practice is limited to the method of conducting the exposures. The preparation of test specimens and evaluation of results are covered in various standards for the specific materials.

    1.4 Exposure conducted according to this practice can use two types of exposure cabinets.

    1.4.1 Type A—A cabinet that allows passive ventilation of specimens being exposed behind glass.

    1.4.2 Type B—Enclosed cabinet with exterior painted black that does not provide for ventilation of specimens exposed behind glass. Exposures conducted using a Type B cabinet are typically referred to as “black box under glass exposures.”

    1.5 Type A exposures of this practice are technically similar to Method B of ISO?877-2.

    1.6 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

    1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


    2. Referenced Documents

    ASTM Standards

    C1036 Specification for Flat Glass

    D3424 Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

    D4303 Test Methods for Lightfastness of Colorants Used in Artists Materials

    D6901 Specification for Artists Colored Pencils

    E824 Test Method for Transfer of Calibration From Reference to Field Radiometers

    E903 Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

    E1084 Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight

    G7 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

    G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

    G173 Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37 Tilted Surface

    G177 Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface

    G201 Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation


    ▼ASTM G24-13第三方檢測機構

    以上標準信息來自互聯網搜索整理,如需了解完整的ASTM G24-13的信息或ASTM G24-13標準解讀,歡迎詳詢。